Industrial mineral filler
Talc Powder for Industrial Applications
Xinruifeng is a talc powder manufacturer supplying hydrated magnesium silicate for industrial filler use. For a quotation, sample or specification match, start with a reference option or share your own material requirements.
Four reference specifications
Talc Powder Reference Specifications
Compare average particle size, specific surface area, oil absorption and whiteness across four catalogue reference options.
Four catalogue reference options
- 400 mesh
- YF-1250
- YF-3000
- YF-5000
400 mesh
- Average particle size
- 7.5±1 μm
- Specific surface area
- 5500±500 cm²/g
- Specific gravity
- 2.7 g/cm³
- Oil absorption
- 20±2 g/100g
- Loss on ignition
- ≤6%
- Moisture
- ≤0.45%
- pH
- 7.5–8.5
- Whiteness
- 91±1
YF-1250
- Average particle size
- 6.5±0.5 μm
- Specific surface area
- 7000±500 cm²/g
- Specific gravity
- 2.7 g/cm³
- Oil absorption
- 23±2 g/100g
- Loss on ignition
- ≤6%
- Moisture
- ≤0.45%
- pH
- 7.5–8.5
- Whiteness
- 92±1
YF-3000
- Average particle size
- 3.5±0.5 μm
- Specific surface area
- 12500±500 cm²/g
- Specific gravity
- 2.7 g/cm³
- Oil absorption
- 27±2 g/100g
- Loss on ignition
- ≤6%
- Moisture
- ≤0.45%
- pH
- 7.5–8.5
- Whiteness
- 94±1
YF-5000
- Average particle size
- 2.5±0.5 μm
- Specific surface area
- 15500±500 cm²/g
- Specific gravity
- 2.7 g/cm³
- Oil absorption
- 30±2 g/100g
- Loss on ignition
- ≤6%
- Moisture
- ≤0.45%
- pH
- 7.5–8.5
- Whiteness
- 94±1
Confirm through application testing
These technical indicators are for reference only. Before use, carry out adequate tests and confirm that the talc meets your intended product's quality requirements.
Start with a reference designation
Use a reference designation as the starting point for a quotation or sample evaluation. The catalogue data are not current batch results or a statement of stock availability.
About specific gravity
The catalogue lists specific gravity with the unit g/cm³ but does not specify the measurement definition.
Talc processing characteristics
Industrial Uses of Talc
Talc's layered crystalline structure allows it to split into flakes and gives it lubricity. Its anti-sticking and flow-aid properties are useful in industrial processing.
Part of our mineral filler product range, talc has the following industrial uses:
-
COATINGS
Paint and coatings
A white extender pigment in water-, oil- and resin-based industrial coatings, including primers and protective paints. It also provides hiding power.
-
PLASTICS
Plastics
A raw mineral filler for plastic-compounding and masterbatch manufacturers.
-
RUBBER
Rubber and cables
A rubber filler and anti-sticking material used for reinforcement and separation in rubber compounds for cables.
Other industrial uses
Other industrial uses include coated-paper coatings and textile lubrication. Talc also has refractory, acid-resistant and insulating characteristics, a high melting point and low chemical reactivity. Evaluate these characteristics in your intended product; they do not establish the suitability of a particular reference model.
Custom specification options
Talc Customization for Your Requirements
We support talc customization for particle size or mesh, whiteness, surface treatment and packaging. Feasibility depends on the product and grade, technical evaluation and order requirements.
- SIZEParticle size or mesh
- APPEARANCEWhiteness
- PROCESSINGSurface treatment
- PACKAGINGPackaging
If the reference options do not match your specification, share your target requirements and expected quantity so we can review feasibility and the minimum order.
Samples and documents for evaluation
Material Evaluation with Xinruifeng
Samples and trial orders
Xinruifeng manufactures talc powder and offers samples and trial orders for material evaluation. Test the talc against your intended product's requirements before use.
Technical documentation
- TDS
- COA
- SDS / MSDS
We can provide TDS, COA and SDS/MSDS documentation. When requesting a document, tell us the talc product or grade and any version, language or delivery-format requirements.
Order planning
Packing, Minimum Orders and Lead Time
A 25 kg catalogue example
The catalogue shows YF-1250 talc powder in a 25 kg net-weight bag. This is one packing example; actual packaging is discussed for your order. The bag size does not set the minimum order quantity.
MOQ and lead-time conditions
Minimum order requirements depend on the product and customization requested. We quote lead time according to your order quantity.
Technical inquiry
Discuss Your Talc Requirements
For a quote, a sample request or specification matching, tell us the intended use and the reference model or target specifications you have in mind. Include your expected quantity, relevant packing or destination details, and contact information.
Details to include
- Intended use
- Reference model or target specifications
- Expected quantity
- Packing or destination details
- Your contact details